| 000 | 01519cam a2200325 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223030256.0 | ||
| 008 | 100918s2010 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.13.M.Sc.2010.Mo.I | ||
| 100 | 0 | _aMohammed Ahmed Ali Shehata | |
| 245 | 1 | 0 |
_aInvestigation of rolling a round tube into a square tubular section / _cMohammed Ahmed Ali Shehata ; Supervised Laila S. Bayoumi |
| 246 | 1 | 5 | _aدراسة تشكيل ماسورة ذات مقطع مستدير الى ماسورة مربعة المقطع بواسطة الدرفلة |
| 260 |
_aCairo : _bMohammed Ahmed Ali Shehata , _c2010 |
||
| 300 |
_a74P. : _bcharts , Facsimiles ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Mechanical Design and Production | ||
| 520 | _aThe shaping process is carried out by rolling mill . Experimental results were obtained from sevral runs using steel circular tubes of the same outsid diameter and of different wall thickness at different roll openings . Load cells that measured the roll load and rolling torque have been specially designed abnd calibrated | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aCircular | |
| 653 | 4 | _aRolling | |
| 653 | 4 | _aTube | |
| 700 | 0 |
_aLaila Salah Bayoumi , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSoheir _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c31330 _d31330 |
||