| 000 | 01710cam a2200337 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223030256.0 | ||
| 008 | 100919s2010 ua dhe f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.13.M.Sc.2010.Kh.D | ||
| 100 | 0 | _aKhaled Abdelaziz Mohamed | |
| 245 | 1 | 0 |
_aDesign construction and performance evaluation of torque standard machine / _cKhaled Abdelaziz Mohamed ; Supervised Mahmoud Ghareb Elsherbiny , Ali Elsayed Abuelezz |
| 246 | 1 | 5 | _aتصميم وانشاء وتقييم أداء ماكينة قياسية لمعايرات العزوم |
| 260 |
_aCairo : _bKhaled Abdelaziz Mohamed , _c2010 |
||
| 300 |
_a93 P. : _bcharts , facsimiles , plans ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Mechanical Design and Production | ||
| 520 | _aThe machine was designed following the component system principle based on the vertical axis method without intermediate bearing wiihich reduces 70% of the cost . Prior to that the parts chosen for the design is reviewed as well as the machine structural parts . Finite Element Analysis (FEM) for the resulting stresses in the critical parts of the machine are computed to ensure that the designed machine can perform accurately and safely | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aCalibration | |
| 653 | 4 | _aTorque | |
| 653 | 4 | _aTraceability | |
| 700 | 0 |
_aAli Elsayed Abuelezz , _eSupervisor |
|
| 700 | 0 |
_aMahmoud Ghareb Elsherbiny , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSoheir _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c31354 _d31354 |
||