| 000 | 01699cam a2200337 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223030522.0 | ||
| 008 | 111130s2011 ua e f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.05.M.Sc.2011.Ha.D | ||
| 100 | 0 | _aHazem Hossam Eldin Elanwar | |
| 245 | 1 | 0 |
_aDynamic identification for linear stsems using numerical and analytical approaches / _cHazem Hossam Eldin Elanwar ; Supervised Hesham S. Sayed , M. Hassanien Serror |
| 246 | 1 | 5 | _aتعيين معامل الأضمحلال باستخدام الطرق التحليلية و المعملية |
| 260 |
_aCairo : _bHazem Hossam Eldin Elanwar , _c2011 |
||
| 300 |
_a93 P. : _bplans ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Civil Engineering | ||
| 520 | _aDamping ratio became one of the most important factors that govern the structural response due to lateral loads. Despite its significance, there is no accurate mathematical representation for it. This research aims to develop a procedure that identifies the damping ratio using system identification technique and measured dynamic responses. The proposed procedure was applied on a laboratory experiment utilizing shaking table device | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aDamping identification | |
| 653 | 4 | _aLaboratory experiment | |
| 653 | 4 | _aShaking table | |
| 700 | 0 |
_aHesham Sobhy Sayed , _eSupervisor |
|
| 700 | 0 |
_aMohamed Hassanien Serror , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSamia _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c36401 _d36401 |
||