000			01987cam a2200349 a 4500
003			EG-GiCUC
005			20250223030827.0
008			130423s2013 ua e f m 000 0 eng d
040			_aEG-GiCUC _beng _cEG-GiCUC
041	0		_aeng
049			_aDeposite
097			_aM.Sc
099			_aCai01.13.04.M.Sc.2013.Ma.R
100	0		_aMai Hassan Elsayed Sharaf Eldeen Roushdy
245	1	0	_aReuse of kiln rollers waste in the manufacture of ceramic wall tiles / _cMai Hassan Elsayed Sharaf Eldeen Roushdy ; Supervised Magdi Fouad Abadir , Hanan Hassan Elsersy , Shereen Kamel Amin Kamel
246	1	5	_aإعادة استخدام المسحوق الناتج عن تجليج رولات أفران السيراميك في صناعة سيراميك الحوائط
260			_aCairo : _bMai Hassan Elsayed Sharaf Eldeen Roushdy , _c2013
300			_a111 P. : _bplans ; _c30cm
502			_aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Chemical Engineering
520			_aThe fine waster resulying from grinding of kiln rollers was tested for chemical and mineralogical composition. It was gradually added to standard wall tiles mix in proportions ranging from 2% to 10%. The samples were pressed into slabs at 27 MPa, drying then firing at temperatures ranging from 1050 to 1150 {u00B0}C for up to 15 minutes. Their physico-mechanical properties were then investigated and results interpreted in the light of XRD and SEM findings. It was found that it is possible to add this waste at 1 or 2% level to wall tiles bodies without impairing its properties
530			_aIssued also as CD
653		4	_aGrind powder
653		4	_aKiln rollers
653		4	_aWall tiles
700	0		_aHanan Hassan Elsersy , _eSupervisor
700	0		_aMagdi Fouad Abadir , _eSupervisor
700	0		_aShereen Kamel Amin Kamel , _eSupervisor
856			_uhttp://172.23.153.220/th.pdf
905			_aNazla _eRevisor
905			_aSamia _eCataloger
942			_2ddc _cTH
999			_c42753 _d42753