| 000 | 01838cam a2200349 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223030902.0 | ||
| 008 | 131109s2013 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.11.M.Sc.2013.Fa.C | ||
| 100 | 0 | _aFawzy Abdlaziz Mohamed | |
| 245 | 1 | 0 |
_aCFD simulation of fuel spray patterns from tapered swirl injector inside an air- flow pipe / _cFawzy Abdlaziz Mohamed ; Supervised Mohamed Ali Hassan , Essam Farid Aboserie , Hatem Omer Haridy |
| 246 | 1 | 5 | _aمحاكاه ديناميكية الموانع الحسابية لانماط رذاذ وقود من حاقن دوامى داخل هواء متدفق بانبوبة |
| 260 |
_aCairo : _bFawzy Abdlaziz Mohamed , _c2013 |
||
| 300 |
_a82 P. : _bcharts , facsimiles ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Mechanical Power Engineering | ||
| 520 | _aInjecting liquid spray using a surface mounted swirl injector in a gas pipe flow to achieve a uniform mixture within a limited distance from the injector location is a challenging problem . This work analyzes the mass distribution from a swirl injector that has any nozzle cut profile . An equation has been derived to estimate the nozzle circumferential distribution of the mass relative to the total mass exiting the nozzle | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aComputational fluid dynamics (CFD) | |
| 653 | 4 | _aSpray | |
| 653 | 4 | _aSwirl injector | |
| 700 | 0 |
_aEssam Farid Aboserie , _eSupervisor |
|
| 700 | 0 |
_aHatem Omer Haridy , _eSupervisor |
|
| 700 | 0 |
_aMohamed Ali Hassan , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSoheir _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c44004 _d44004 |
||