| 000 | 01806cam a2200325 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223031141.0 | ||
| 008 | 150216s2014 ua o f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aPh.D | ||
| 099 | _aCai01.13.05.Ph.D.2014.Ah.N | ||
| 100 | 0 | _aAhmed Mohamed Anwar Bassuony | |
| 245 | 1 | 0 |
_aNew technique for conections in cold - formed steel structures / _cAhmed Mohamed Anwar Bassuony ; Supervised Sherif Ahmed Mourad |
| 246 | 1 | 5 | _aاسلوب مستحدث للوصلات فى المنشأت من الحديد المدرفل على البارد |
| 260 |
_aCairo : _bAhmed Mohamed Anwar Bassuony , _c2014 |
||
| 300 |
_a143 P. : _bphotographs ; _c30cm |
||
| 502 | _aThesis (Ph.D.) - Cairo University - Faculty of Engineering - Department of Civil Engineering | ||
| 520 | _aA new technique is introduced for mechanical connection of cold formed steel structure. The technique based on using a part of a tube (ring) to be inserted in a pre punched hole and deforming the tube edges to hold the connected part together. The experimental research consisted of three phases, in the first phase the developing the steel O - ring (SOR) was done, the second phase included experimental investigation of 126 test specimens and the third phase included a FE analysis for six models of the new connection using ABAQUS software. The failure modes were identified. Design equations for this new connection were introduced | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aCold - formed steel | |
| 653 | 4 | _aConnection | |
| 653 | 4 | _aSteel ring | |
| 700 | 0 |
_aSherif Ahmed Mourad , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSamia _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c49404 _d49404 |
||