| 000 | 01886cam a2200349 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223031227.0 | ||
| 008 | 150912s2014 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.10.M.Sc.2014.Ma.O | ||
| 100 | 0 | _aMahmoud Mohamed Taha Abdallah Maghrabi | |
| 245 | 1 | 0 |
_aOptimal design of photonic crystal structures / _cMahmoud Mohamed Taha Abdallah Maghrabi ; Supervised Abdelkarim S. O. Hassan , Nadia H. Rafat , Ahmed S. A. Mohamed |
| 246 | 1 | 5 | _aالتصميم الأمثل لهياكل البلورات الضوئية |
| 260 |
_aCairo : _bMahmoud Mohamed Taha Abdallah Maghrabi , _c2014 |
||
| 300 |
_a127 P. : _bcharts , facsimiles ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Engineering - Department of Mathematics and Physics | ||
| 520 | _aThis thesis proposes two novel optimization approaches for achieving the optimal design of 1D photonic crystals. The {uFB01}rst approach is based on minimax criterion where nominal values of designable parameters are varied to best satisfy design speci{uFB01}cations. The second approach is based on design centering criterion, in which the objective is to maximize the probability of satisfying design speci{uFB01}cations. Two practical examples are given to demonstrate {uFB02}exibility and e{uFB03}ciency of the approaches | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aMinimax optimization | |
| 653 | 4 | _aOptimal system design | |
| 653 | 4 | _aSimulated-driven optimization | |
| 700 | 0 |
_aAbdelkarim Shaban Omar Hassan , _eSupervisor |
|
| 700 | 0 |
_aAhmed Sayed Abdelsamea Mohamed , _eSupervisor |
|
| 700 | 0 |
_aNadia Hassain Rafat , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSoheir _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c50887 _d50887 |
||