| 000 | 03231cam a2200337 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223032002.0 | ||
| 008 | 180502s2017 ua dh f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.09.10.M.Sc.2017.Ma.E | ||
| 100 | 0 | _aMariam Adel Hosny | |
| 245 | 1 | 0 |
_aEffect of aging on hydrolytic resistance, microstructure, flexure strength and translucency of lithium disilicate, translucent zirconia and zirconia reinforced lithium silicate CAD / CAM blocks : _bin - vitro study / _cMariam Adel Hosny ; Supervised Ahmed Nour Eldin Ahmed Habib , Rasha Mohamed Abdelraouf |
| 246 | 1 | 5 |
_aتاثير التعتيق علي مقاومة التحلل المائي و التركيب المجهري و قوة الثنية والشفافية لبلوكات السيراميك المصنوعة من الليثيوم تنائي السيليكات و المصنوعة من الزيركونيا الشفافة و المصنوعة من الليثيوم سيليكات المدعم بالزيركونيا : _bالدراسة معملية |
| 260 |
_aCairo : _bMariam Adel Hosny , _c2017 |
||
| 300 |
_a67 P. : _bcharts , facsimiles ; _c25cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Oral and Dental Medicine - Department of Dental Materials | ||
| 520 | _aAim: Investigate aging effect of three ceramic CAD/CAM block materials: lithium disilicate(LD), translucent zirconia(TZ) and zirconia reinforced lithium silicate(ZLD) on their hydrolytic resistance, microstructure, flexure strength and translucency. Material and methods: Fourteen disc shaped specimens were prepared from each material(12mm diameter and 1.2 mm thickness). Seven specimens per material were subjected to accelerated aging according to ISO standard:6872 which specifies boiling in 4% acetic acid at 800C for 16 hours. While the other seven were considered as control. Weight loss was measured by weighing specimens before and after aging. Crystalline structure was investigated before and after aging by x-ray diffraction(XRD) while microstructure by scanning electron microscope(SEM). All specimens were subjected to translucency parameter testing using spectrophotometry then biaxial flexure strength testing. Statistical analysis performed with IBM®SPSS®Statistics, Windows Version20. Results: No significant percentage loss of weight after aging of the three materials. LD had the highest translucency followed by ZLD and TZ was the least. In addition, LD translucency decreased by aging while translucency of the others was not affected. TZ had the highest flexure strength while there was no difference between the others. Flexure strength of the three materials was not affected by aging and XRD graphs showed no change after aging of the three materials | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aAccelerated aging | |
| 653 | 4 | _aCrystalline structure | |
| 653 | 4 | _aMicrostructure | |
| 700 | 0 |
_aAhmed Nour Eldin Ahmed Habib , _eSupervisor |
|
| 700 | 0 |
_aRasha Mohamed Abdelraouf , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aShimaa _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c66063 _d66063 |
||