| 000 | 02663cam a2200325 a 4500 | ||
|---|---|---|---|
| 003 | EG-GiCUC | ||
| 005 | 20250223032020.0 | ||
| 008 | 180708s2016 ua do f m 000 0 eng d | ||
| 040 |
_aEG-GiCUC _beng _cEG-GiCUC |
||
| 041 | 0 | _aeng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.09.10.M.Sc.2016.Al.M | ||
| 100 | 0 | _aAlaa Elzouk Hassan Abdelkhalik | |
| 245 | 1 | 0 |
_aMarginal integrity and microleakage of different ceramic and composite onlays fabricated by CAD/CAM and heat-pressed techniques / _cAlaa Elzouk Hassan Abdelkhalik ; Supervised Ahmed Nour Eldin Ahmed Habib |
| 246 | 1 | 5 | _aكينونة الحافة و التسريب الدقيق للترصيعات المصنعة من مواد مختلفة للسيراميك و الكومبوزيت بطريقتى الضغط الحرارى و الخرط بمساعدة الحاسوب |
| 260 |
_aCairo : _bAlaa Elzouk Hassan Abdelkhalik , _c2016 |
||
| 300 |
_a127 P. : _bcharts , photographs ; _c25cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty of Oral and Dental Medicine - Department of Dental Materials | ||
| 520 | _aThis study was performed to evaluate the marginal integrity and microleakage of onlays fabricated from four different materials: three CAD/CAM materials (feldspathic ceramic, hybrid ceramic and nano-composite blocks) and one heat press material (lithium disilicate ceramic IPS e.max). A total of thirty two human maxillary premolars were used in this study. Occluso-proximal cavities of standard dimensions were prepared from four types of materials. The teeth were divided into four main groups. Eight onlays for each type of the tested materials. Thirty two onlays have been fabricated either by CAD/CAM or heat press techniques. The groups were: Group 1: Vita Mark ll ceramic material. Group 2: Vita Enamic ceramic material. Group 3: Lava Ultimate composite material. Group 4: IPS e.max press ceramic material. Dual cure self-adhesive cement was used to lute the restorations on their corresponding cavity. Hydrofluoric acid gel, silane coupling agent and adhesive bonding agent were used for surface treatment of the restorations. Marginal integrity was evaluated before and after cementation of the onlays using stereomicroscope. Microleakage of each tested group was evaluated using dye penetration method and measured using stereomicroscope | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aCAD/CAM | |
| 653 | 4 | _aMarginal integrity | |
| 653 | 4 | _aMicroleakage | |
| 700 | 0 |
_aAhmed Nour Eldin Ahmed Habib , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aNazla _eRevisor |
||
| 905 |
_aSamia _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c66683 _d66683 |
||