| 000 | 016620000a22003490004500 | ||
|---|---|---|---|
| 003 | EG-GICUC | ||
| 005 | 20250223025157.0 | ||
| 008 | 080326s2008 ua d f m 000 0 eng d | ||
| 040 |
_aEG-GICUC _beng _cEG-GICUC |
||
| 041 | 0 | _aEng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.13.M.Sc.2008.Mo.E | ||
| 100 | 0 | _aMohamed Fawzy Nasr Ibrahim | |
| 245 | 1 | 0 |
_aEffect of cutting parameters and workpiece material on tool life / _cMohamed Fawzy Nasr Ibrahim ; Supervised Mohamed Samir Mostafa Riad , Ahmed Aly Elzoghby , Tarek Mahmoud Elhossainy |
| 246 | 1 | 5 | _aتاثير عوامل القطع وخامة المعدن المقطوع على عمر الحد القاطع |
| 260 |
_aCairo : _bMohamed Fawzy Nasr Ibrahim , _c2008 |
||
| 300 |
_a79P. : _bcharts ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty Of Engineering - Department Of Mechanical Design and Production | ||
| 520 | _aHigh speed (HSS) tool life is measured by the wear occurred in the tool the flank wear istaken as measure for tool life in the present work this research investigates the effect of cutting condition (speed , feed , depthof cut) normal rake angle angle and workpiecematerial hardness on tool life cutting forces and surface roughness | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _aCutting parameters | |
| 653 | 4 | _aTool life | |
| 653 | 4 | _aWear | |
| 700 | 0 |
_aAhmed Aly Elzoghby , _eSupervisor |
|
| 700 | 0 |
_aMohamed Samir Mostafa Riad , _eSupervisor |
|
| 700 | 0 |
_aTarek Mahmoud Elhossai , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aMustafa _eRevisor |
||
| 905 |
_aSoheir _eCataloger |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c7342 _d7342 |
||