| 000 | 020090000a22003490004500 | ||
|---|---|---|---|
| 003 | EG-GICUC | ||
| 005 | 20250223032405.0 | ||
| 008 | 061012s2005 ua a f m 000 0 eng d | ||
| 040 |
_aEG-GICUC _beng _cEG-GICUC |
||
| 041 | 0 | _aEng | |
| 049 | _aDeposite | ||
| 097 | _aM.Sc | ||
| 099 | _aCai01.13.12.M.Sc.2005.So.E. | ||
| 100 | 0 | _aSobhy Abd El Hameed Mahgob | |
| 245 | 1 | 0 |
_aEffect of nitrogen content on corrosive wear of 316 L austenitic stainless steel / _cSobhy Abd El Hameed Mahgob ; Supervised Hafez Abd El azeem Ahmed , Kamal Elmenshawy Mohamed , Randa Mohamed Abd El Karim |
| 246 | 1 | 5 | _aتاثير النيتروجين على معدل تاكل بالبرى للصلب الاستنيتى 316 منخفض الكربون |
| 260 |
_aCairo : _bSobhy Abd El Hameed Mahgob , _c2005 |
||
| 300 |
_a95P : _bill ; _c30cm |
||
| 502 | _aThesis (M.Sc.) - Cairo University - Faculty Of Engineering - Department Of Metallurgical Engineering | ||
| 520 | _aMicrostructure examination of as received , solution and aging heat treated specimens was conducted by electron and optical microscopy before and after corrosionThe results showed that , there is no precipitate of nitride in as received or solution heat treated samplesOn the other hand by increasingging temperature there are precipitates of nitrideAlso the examination illustrated that , the tendency of abrasion is decreased by increasing nitrogen content in as received and solution heat treated this due to nitrogen had been completely dissolved in solution heat treatment conditions and hence improves their wear resistance | ||
| 530 | _aIssued also as CD | ||
| 653 | 4 | _anitrogen | |
| 653 | 4 | _aPotentiodynamic | |
| 653 | 4 | _astainless steel | |
| 700 | 0 |
_aHafez Abd El azeem Ahmed , _eSupervisor |
|
| 700 | 0 |
_aKamal Elmenshawy Mohamed , _eSupervisor |
|
| 700 | 0 |
_aRanda Mohamed Abd El Karim , _eSupervisor |
|
| 856 | _uhttp://172.23.153.220/th.pdf | ||
| 905 |
_aAmira _eCataloger |
||
| 905 |
_aMustafa _eRevisor |
||
| 942 |
_2ddc _cTH |
||
| 999 |
_c74110 _d74110 |
||